CAN Gateway: Difference between revisions
Jump to navigation
Jump to search
GeorgeDewar (talk | contribs) No edit summary |
GeorgeDewar (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
The CAN Gateway is a module in the ZE1 Nissan Leaf. It connects multiple CAN Buses together. It is described in the service manual as a 6 channel CAN gateway, implying that it can communicate on up to 6 CAN buses. However, wiring diagrams show 10 different CAN bus connections, so it must in some cases either act as both ends of a bus, or operate in the middle of a bus with connections in and out. | The CAN Gateway is a module in the ZE1 Nissan Leaf. It connects multiple CAN Buses together. It is described in the service manual as a 6 channel CAN gateway, implying that it can communicate on up to 6 CAN buses. However, wiring diagrams show 10 different CAN bus connections, so it must in some cases either act as both ends of a bus, or operate in the middle of a bus with connections in and out. | ||
== Location and access == | |||
The CAN Gateway is located behind the [[Combination Meter]]. <!-- Is this true for both RHD and LHD vehicles? --> | |||
[https://www.youtube.com/watch?v=gkA1WDu8cq0&t=276s&ab_channel=EVsEnhanced JDM ZE1 Leaf Instrument Cluster Removal and Installation] | |||
== Connections == | == Connections == | ||
Revision as of 12:20, 6 April 2025
The CAN Gateway is a module in the ZE1 Nissan Leaf. It connects multiple CAN Buses together. It is described in the service manual as a 6 channel CAN gateway, implying that it can communicate on up to 6 CAN buses. However, wiring diagrams show 10 different CAN bus connections, so it must in some cases either act as both ends of a bus, or operate in the middle of a bus with connections in and out.
Location and access
The CAN Gateway is located behind the Combination Meter.
JDM ZE1 Leaf Instrument Cluster Removal and Installation
Connections
The CAN Gateway has a single 24-pin connector (M101) of type TH24FW-NH.[1]
| Terminal No. | Color of Wire | Signal Name |
|---|---|---|
| 1 | L | VEHICLE CAN COMMUNICATION CIRCUIT-H |
| 2 | BR | ADAS CAN COMMUNICATION-H |
| 3 | W | BATTERY |
| 4 | SB | IT CAN COMMUNICATION CIRCUIT-H (EXCEPT FOR MEXICO) |
| 5 | B | GROUND |
| 6 | GR | CHASSIS CAN COMMUNICATION CIRCUIT-H |
| 7 | BR | ITS CAN COMMUNICATION CIRCUIT 2-H |
| 8 | L | DIAGNOSTIC CAN COMMUNICATION CIRCUIT-H |
| 9 | GR | CHASSIS CAN COMMUNICATION CIRCUIT-H |
| 10 | BR | ADAS CAN COMMUNICATION-H |
| 11 | L | DIAGNOSTIC CAN COMMUNICATION CIRCUIT-H |
| 12 | L | – |
| 13 | P | VEHICLE CAN COMMUNICATION CIRCUIT-L |
| 14 | W | ADAS CAN COMMUNICATION-L |
| 15 | G | IGNITION |
| 16 | V | IT CAN COMMUNICATION CIRCUIT-L (EXCEPT FOR MEXICO) |
| 17 | B | GROUND |
| 18 | G | CHASSIS CAN COMMUNICATION CIRCUIT-L |
| 19 | R | ITS CAN COMMUNICATION CIRCUIT 2-L |
| 20 | W | DIAGNOSTIC CAN COMMUNICATION CIRCUIT-L |
| 21 | G | CHASSIS CAN COMMUNICATION CIRCUIT-L |
| 22 | W | ADAS CAN COMMUNICATION-L |
| 23 | W | DIAGNOSTIC CAN COMMUNICATION CIRCUIT-L |
| 24 | G | – |
Buses connected
| Bus | Pins (H,L) | Comments |
|---|---|---|
| VEHICLE CAN | 1,13 | VCM, IPDM, Air bag diagnosis, combination meter, keyless entry, TPMS, VSP, BCM |
| ADAS CAN | 2,14 and 10,22 | |
| IT-CAN | 4,16 | AV control unit, TCU, CAN terminator |
| CHASSIS CAN | 6,18 and 9,21 | Steering angle sensor, EPS control unit, chassis control module, parking brake, brakes, ABS |
| ITS-CAN | 7,19 | Around View Monitor Control Unit, Side Radars, CAN terminator (ITS) |
| DIAGNOSTIC CAN | 8,20 and 11,23 | OBDII port |
| EV-CAN | 12,24 | VCM, Inverter, PDM, A/C, LBC |
External Links
References
- ↑ 2018 LEAF NAM Wiring Diagrams